Leader Class JetFire robot front view.

One compound word to describe JetFire in the Transformers : Revenge of the Fallen movie, Old Geezer. In the movie JetFire was a former Decepticon and grew tired of war. I do not recall that the movie explicitly mentioned that JetFire is an Autobot. I guess the enemy of my enemy is my friend is in effect here. The version of this JetFire is the Takara version. Perhaps if you have the Hasbro version, you may spot the difference.

Leader Class JetFire package in the front shows of the Takara version have Japanese stickers all over it.

Fundamentally, there is not much difference of the Takara version and the Hasbro version JetFire. Everything is the same, except there is some makeshift stickers sticked all over the place in which is implied it is for consumption in Japanese market. The transformation sheet is in Japanese but the illustration is the same for the Takara and Hasbro is the same.

All English, Leader Class JetFire package at the back no Japanese stickers.

At the bottom of the package, in which there is no picture of in the review. There are stickers for Japanese consumers to contact TakaraTomy. Basically, there is not must noticeable difference between the Takara version and Hasbro version. However, there are some of my friends did mentioned that the whiskers of JetFire of Takara is thicker.

Leader Class JetFire has meshes of wires and rubber band.

It took me about 5 minutes to untie JetFire from its coffin package. Unfortunately other than the mech-alive feature and the voice electronics as well as light up of chest and the eyes legs do not have any commendable articulations. Articulation of the hands and arms are good but not impressive if you make comparison to the ROTF leader class Optimus Prime.

Default Leader Class JetFire back without removal of parts.

In order to make the robot figure stand, the body needs to be made leaning slightly forward. The joints of the legs at the pelvic region is tight with ratchet joints. However, like any senior citizens JetFire too suffers from weak knees.

Close up shot of Leader Class JetFire robot chicken leg.

Leader Class JetFire posture leaning slightly forward.

The trick to solve the heavier body of Jetfire due to the weak knees, lean the body of JetFire slightly forward using the joints of the legs connected to the hips.

The most articulated appendage of JetFire is it’s arms.

Leader Class JetFire robot arm articulated at the shoulder and elbow.

JetFire hand claw is able to twist at the wrist, unfortunately the claw unable to move individual. But it provides good grip to his walking stick.

JetFire robot claw on his walking stick.

The only movement given to the head is swaying left and right. Though the electronic and lighting uses the head to add effect of JetFire eyes glowing red.

JetFire robot head close up shot.

JetFire mech-alive gimmick other than the short speech, is its firey red eyes.

The mech-alive gimmick is achieved by pulling the yellow lever which is placed at the middle of the robot chest. The speech is “JetFire is my name”. Red lights flash in the eyes and at the chest, head turns horizontally left and right.

JetFire battery is placed at the back.

The battery compartment can only be accessible when JetFire is in its robot mode. The procedure involves lifting up the back plate/trench coat of JetFire. A small phillip head screw driver is needed to complete the operations. The battery is provided. AA sized batteries are needed, 2 of them.

Leader Class JetFire robot comes with 2 AA batteries included.

In term of accessories, JetFire only has a Gatling gun and a walking stick. Unforturnately, the walking stick or cane does not transform into an energon axe.

JetFire Gatling cannon with missle attached.

JetFire Gatling cannon back exposing the clip to hold onto SR-71 and both arms of JetFire and Optimus Prime.

JetFire Gatling canon looks better with missile detached.

Of course JetFire review is not complete without its alternate mode the SR-71 blackbird. Unfortunately, the alternate mode in my opinion is not even a half baked job. The transformation is relatively simple compared to Optimus Prime.

Step 1 - close JetFire whisker and lift up JetFire's cloak.

Step 2 - Bring up the panel to hide the head of JetFire.

Step 3 - Have all the major pieces of SR-71 shell aligned and combine proper.

Step 4 - With the SR-71 shell aligned, snap the boosters, engines to the side of the shell.

Step 5 - Check all the SR-71 shell ensure it is properly snapped.

Step 6 - There should be 2 part of dangling belt leave it as is.

Step 7 - Divide the body of JetFire into 2 vertical parts.

Step 8 - Have the upper half and lower half snap on to the SR-71 shell.

Step 9 - Twist the arms and shoulder to prepare to form the SR-71 nosecone.

Step 10 - Move the shoulder up closer to the head.

Step 11 - Snap the nosecone, the fusalage with the cockpit area.

Step 12 - Align the hands together and place the cane to JetFire claws.

Step 13 - Twist the shoulder part which is silver to facing you.

Step 14 - Rearrange the foot of JetFire into position.

Step 15 - Rotate the joints from the hips to peg a connector from the leg into the SR-71 shell.

For the transformation, JetFire alternate mode the SR-71 is only half done after the transformation is complete. From the top, it is a sleek SR-71 profile no doubt about it. But from the view at the below, it is a robot twist itself to follow the shell of the SR-71.

Superb accuracy when looking from the top.

Mesh of twisted robot at the bottom.

Even in the SR-71 mode, JetFire blue claws are clearly visible from the front.

Claw is not visible but the silver part of the robot is still sticking out.

The trigger or button of the sound effect is placed at the back of the SR-71. It gives effect of high pitched jet engine screaming.

Sound effect button.

There is  decent attempts to put details to the SR-71 Blackbird mode of Jetfire.

Name and rank of pilot assigned to the SR-71 Backbird printed at the lower part of the cockpit canopy.

There is tampo print below the cockpit canopy at the left which read as “LT. COL. BRAWLEY Warning : This aircraft contains a seat containing explosive charge seek maintenance manual before removing.”

Skunkworks logo/mascot on top of Decepticon emblem at the tail fins.

Decepticon insignia defaced.

Decent try to make details at the inner part of the thrusters.

Too bad the the back of the SR-71, the part of the robot hips is exposed.

SR-71 engine details.

The view at the side of the SR-71 is not so pleasant, as it is visible that JetFire make himself to a shape similar to SR-71 shell which is place on top of its robot back.

Closer view at the side of the fuselage.

JetFire robot parts is clearly visible below the SR-71 shell.

The main part of the SR-71 still expose the robot parts.

JetFire SR-71 overall view from the front.

From reviewing this toy, it is impossible to hide robot parts of JetFire if you plan to take overall isometric angle of JetFire in its alternate mode.

There is no redemption in the JetFire alternate mode, for the entire robot is visible at the bottom of the SR-71.

The robot mode is decent though. A small modification can be made to take away the old geezer image of JetFire. It can be done by transforming part of the cloak of JetFire into the primary blaster of Powered-Up Prime.

Lend me your primary blaster Powered-Up Prime.

Part of the "Trench coat" transformed into the primary gun.

JetFire the gunslinger.

Giving JetFire Powered-UP Prime, makes JetFire a walking weapon and a complete bad ass.

Summary, the robot mode of JetFire is good but lack of articulation of the legs is a bit of a bad point. It takes time to grow onto liking JetFire in its old geezer robot mode.

In the alternate mode, SR-71 Blackbird is unbelievable. It seems more like a rushed product just to be a shell to combine with Optimus Prime.

The only reason that I see that you should get Leader Class JetFire is because you want to have a complete ROTF toyline. Or because you want to make Powered-Up Prime. Other than the other 2 reasons I do not see why Leader Class JetFire is prefered Please enlighten me

Till the next post. Thank you for reading.

Optimus Prime Single Energon Sword Attack CloseUp.

Hasbro Revenge of the Fallen (ROTF) leader class is definately the most movie accurate representation of Optimus Prime in both the 2007 and 2009 Transformers Movie.

This toy easily outdone any Takara masterpiece Transfromers in term of details, complexity of transformation and playability. Out of the box, Optimus Prime is in his robot mode ready to be pose with various pose. Transforming Prime into the SemiTruck is very complicated and it shows superb engineering of current toys compared to the G1 transformers.

A look at Optimus Prime alternate mode which is a SemiTruck, the mode is almost perfect.

Optimus Prime SemiTruck Front.

Only the back of the Truck , the coach and the bottom view show the robot parts. Overall, Optimus Prime is more than 90 percent recognizable as a SemiTruck.

Optimus Prime SemiTruck Back view.

The bottom part of the truck would transform into Optimus Prime pelvic and the legs. Where the cab and the engine part forms Optimus Prime upper body.

Optimus Prime SemiTruck Pelvic.

Optimus Prime SemiTruck Bottom view.

Optimus Prime SemiTruck Front Details.

Optimus Prime SemiTruck MechAlive exposed.

The only sound effect of the truck mode is roaring of the SemiTruck engine. Which the button is properly hidden at the back of the SemiTruck cabin. The sound effect button face has an engraved triangle .

Battery Compartment and button to activate Sound Effect.

Batteries are included with Leader Class Optimus Prime. Too bad the default batteries does not carry any well known brand. The good thing is the screw has a valve or a piece of plastic attached, there is no worry of screw gone missing after changing batteries. It is easy to conclude that this toy design is to make battery replacement easy as well as conforming to child safety standards.

Battery Compartment Opened.

In this review, Leader Class Optimus Prime were in its alternate SemiTruck mode. The following are the transformation sequence from SemiTruck mode to robot mode. By default from the package, Optimus Prime is in its Robot mode.

The first part in which is recommended to tansform is the upper body, overall the SemiTruck upper part of the engine and the cabin is Optimus Prime body.

Optimus Prime Body Transformation step 1.

The most important part of the transformation is to detach side of the cabin apart to start the transformation.

Optimus Prime Body Transformation step 2.

After the lower part of the cabin is detached, gently pull the side of the cabin upward, the side of the cabin is locked by a simple peg.

Optimus Prime Body Transformation step 3.

Most of the part is held by plastics pegs and latches. However, the plastic is durable and is not hard and brittle.

Optimus Prime Body Transformation step 4.

Plastic pegs has its matching connector in both mode to ensure that Optimus Prime remains in its mode after transformation.

Optimus Prime Body Transformation step 5.

On the transformation, all the details such as simulation of robot circuitry and internal structure is molded on the plastics. Which is really nice to see and behold how much effort the design team of Hasbro and TakaraTomy has worked to develop this product. I could not imagine how many man work hours put in developing this toy.

Optimus Prime Body Transformation step 6.

At this point of the transformation, all part of leader class Optimus Prime uses just the right type of plastics for the transformation. It is a bit flexible but it hold to its original shape.

Optimus Prime Body Transformation step 7.

The top part of the smoke stacks is made of soft PVC bendable and able to retain its original shape. You will not get a deformed smoke stack while it maintain child safety standards.

Optimus Prime Body Transformation step 8.

Even the rivets like detail is not left out in the mold. This is really a WOW factor for a mass produced toy.

Optimus Prime Body Transformation step 9.

Another critical part of the transformation, you need to push the engine block downwards and the semi truck grill need to be pull away from the engine block to unlock the arms.

Optimus Prime Body Transformation step 10.

Lift the back of the cabin to separate the cabin into 2 parts the upper body and the lower body.

Optimus Prime Body Transformation step 11.

To separate the arms that forms the engine block, at the seam push downwards into the seam slowly.

Optimus Prime Body Transformation step 12.

Once the arm is expose pull the arm away from each other.

Optimus Prime Body Transformation step 13.

Once the arm is move away, the cabin wind shield should be pull all the way back and arms all the way to the side. It will expose the head. The most annoying part of this transformation, Optimus prime voice electronics is sensitive enough to be activated by exclaiming it existance with the phrase “I am Optimus Prime”. The only way to avoid such annoyance is remove the batteries before the transformation. However, if you do so, you will miss another sound effect.

Folding the arm could be tricky I have created a sub part on folding the truck engine cover to form the arms.

Optimus Prime Arm Transformation step 1.

Optimus Prime Arm Transformation step 2.

Optimus Prime Arm Transformation step 3.

Optimus Prime Arm Transformation step 4.

Only 4 simple steps to transform the arm.

Continuation of the body transformation, once Optimus Prime head and neck is put proper.

Optimus Prime Body Transformation step 14.

Without its chest piece, Optimus Prime will look like it suffers from beer gut. The chest piece is really the wind screen of the SemiTruck, in which it is designed to pay homage to the G1 Optimus Prime transformation.

Optimus Prime Body Transformation step 15.

The final step of the body transformation is pretty tricky, you need to attach the plastic tab at the end of the chest piece to the upper side of the beer gut belly.

Optimus Prime Body Transformation step 16.

As demonstrated on the photo, the plastic tab of the chest piece can only be fit in to the belly from the side at the top. In which the gap is larger to fit in the plastic tab. Do another attachment the other side. The transformation of Optimus Prime upper robot body is complete.

Transformation of the upper body of ROTF Leader Class Optimus Prime is the hardest transformation. The legs tranformation is more straight forward, you would not need a transformation manual to make the conversion.

Optimus Prime Legs Transformation step 1.

Continue from the body tranformation, you will notice that the entire lower part of the SemiTruck is actually Optimus Prime leg and its lower body.

Optimus Prime Legs Transformation step 2.

The first step is to split the legs. The it is all folding and defolding the truck lower part to form the feet.

Optimus Prime Legs Transformation step 3.

Optimus Prime Legs Transformation step 4.

Optimus Prime Legs Transformation step 5.

Optimus Prime Legs Transformation step 6.

The transformation is almost done. Only left is making a few final adjustment. The final phase is locking the upper body and the lower body together. Followed by touching up the back of Optimus Prime.

Optimus Prime Transformation FinalPhase 1.

Optimus Prime Transformation FinalPhase 2.

Attaching the upper part and the lower part of the body gives the 80s transformation sound effect. Which I think is the coolest sound effect for this toy.

Optimus Prime Transformation FinalPhase 3.

The final touch up of the transformation phase is folding the back wheels mudflaps and lock it onto the back.

Optimus Prime Transformation FinalPhase 4.

Finally transformation is completed. The new feature of the ROTF toyline is the mech alive. By flicking of a lever or button, it gives impression that the robot is alive. The feature requires pushing down the lever which masked as part of the abdomen piece the gears in the chest piece move and the chest piece seems to move upwards. Prime will exclaim his existance by saying “I am Optimus Prime” . At the same time , the chest will blink with red led lights and the eyes will flash with yellowish green led light.

MechAlive Activation Lever.

MechAlive Activation Lever Pulled Down.

Optimus Prime MechAlive Electronics.

Its a shame that the TakaraTomy version did not exclaim “Watashi wa Convoy Sama” Direct translation would be I am Master Convoy.

The accuracy of the head is very closely resemble Optimus prime in the movie. Unfortunately due to the chest piece design the articulation of the neck is limited. You need to lift up the head to improve the articulation.

Optimus Prime Head Details Front.

Optimus Prime Head Details Side.

The chest details attempt is very commendable, articulation are actually added to the shades at the windscreen.

Robot mode Chest Details.

Articulated sun shades at the windscreen.

Another piece feature is the energon sword used to impale to kill BoneCrusher in the 2007 movie.

Optimus Prime Energon Sword Details CloseUp.

Optimus Prime Energon Sword Activation Switch.

Energon Sword Activation mechanism.

There is a hidden feature for Optimus Prime at the legs. I discovered it from the internet.

Optimus Prime Leg Details.

Optimus Prime Leg secret revealed.

In the articulation department, only the legs has more articulation. There is no articulation at the waist, to make things worse the arm articulation is hindered by the energon swords.

Optimus Prime robot mode articulation limits.

The detailing at the hand and the energon sword is the feature and also the down fall that limits the robot mode articulations.

Optimus Prime Practice SkyDiving.

Forming Arch using all limbs.

The legs articulation is good, that you can simulate Optimus Prime got a chicken leg.

Optimus Prime Knee Articulations.

I had tried a few limited posing without using any support. Bear in mind that the upper body of Optimus Prime is heavy. Leaning too much front or too much back will make him fall.

Optimus Prime Single Energon Sword Attack.

Optimus Prime Counter Attack Pose.

In a summary, ROTF Leader Class Optimus Prime is an excellent toy to be added to any toy collector inventory. The only reason that I can think an avid fan of Transformers skipping this toy is because of too fanatical and head strong that G1 design is better than Michael Bay Transformers.

My friend had made some mod to the existing piece giving Optimus Prime articulated hands and additional blaster .

If you have not get yours today, I would highly recommend you to get your piece today

Till the next post.

P.S. : I am still waiting for my leader class JetFire

Optimus Prime taking leave.

Henkei Megatron robot mode overall view.

Megatron, is one of the early arch-villian type any kid born in the 1980s can relate to. Ruthless, megalomania but with a virtue honor. Of course, a story needs a villian and a hero. Megatron just answered the call.

Takara and Hasbro has reimagined the G1 Megatron and give it a futuristic looking short barreled revolver. At its gun mode it is just fit nicely how a compact modern pistol supposed to fit any adult´s hand. The Henkei version looks better than the Classics Megatron.

Like its arch rival Convoy, Henkei Megatron is pack in its robot mode.

Henkei Megatron package front.

Henkei Megatron package back.

Similar to its Henkei counterpart, the package back is decorated with the characters technical specs, description, features and transformation diagram.

Henkei Megatron package side 1.

Henkei Megatron package side 2.

The packaging show the toy is an advertisement or marketting tool as it introduce characters on the same toy line -_-¨ .

From the package, Henkei Megatron is rather big and it is taller than Henkei Convoy. Unfortunately, there is no accessories for this figure. Just a robot with its oversized canon on the right arm.

Henkei Megatron package open.

Henkei Megatron package back view.

The inner package that stores Megatron at the back is a plain card board. Instructions, comic and a data card is placed into a plastic warp stick to the back.

On the articulation of Henkei Megatron, the figure does not have articulation at the waist, the torso is as stiff as a board. Transformation wise, Henkei Megatron has complex and ingeniously designed transformation.

Henkei Megatron Robot Pose 1.

Henkei Megatron Robot Pose 2.

Henkei Megatron robot mode give an appearence of those Arch type victorian age villian which dressed in black with long overcoats. It is due to the part of the Gun is transfomed unwittingly to Megatron´s back effectively making it a cloak.

Henkei Megatron Robot Pose 3.

The fist of the robot does not twist. It is fixed at a position. Too bad the scope is unremovable and it is an integral part of Megatron.

Henkei Megatron Robot Pose 4.

Henkei Megatron Robot Pose 5.

Henkei Megatron Robot Pose 6.

One good point of this Henkei Megatron is it comes with tight joints at the legs. Unfortunately, it would be hard to make it fix at an angle desired.

Henke Megatron Robot back view.

Henkei Megatron Robot front view.

Like its other Henkei brethens, the head details is commendable and the robot eye give a glow effect. For Henkei Megatron however, the redness is not good enough.

Henkei Megatron head chest.

Henkei Megatron head back view.

Unlike its G1 toy, the Megatron does not suffer the trigger as a boner syndrome.

After it is tranform into gun mode, it can be hold as a pistol.

Henkei Megatron gun mode.

Henkei Megatron gun view 1.

Henkei Megatron gun view 2.

Megatron come with a semi usable scope to boot.

Henkei Megatron gun mode scope.

Target at sight.

Revoltech ARX8 used as target for scope.

Overall, Henkei Megatron is a decent Henkei line toy. Reason I got him were due to discount/sales and it is Megatron.

Only get this if you want to simulate battle and fight between Convoy and Megatron.

Until the next post.

Henkei Megatron saying good bye.

Henkei Convoy posing with primary blaster.

It is rather a delayed review for this figure. Photo were taken before the Queensbay Mall Transformers Convention with TransMYians during June. Nevertheless, personally I prefer this version rather than its Hasbro counter part. Ordered it from HLJ during a discount for this toys, was in luck for retail store in my place of residence is over priced.

If you do not know, in Japan and in most area of far east Asia Transformers purist will simply call Optimus Prime in the far east Asia as Convoy.

Autobot is known as Cybertrons and Decepticons is known as Destrons. A bit confusing but you will get the hang of it.

Unlike the Hasbro packing, Takara packing offer a more compact package with a DataCard of Convoy.

Hasbro Optimus Prime package is standard like all its Tansformers Classics/Universe Voyager Class toys which is way more bulkier and it is in truck mode. For TakaraTomy, Convoy is in robot mode.

The TakaraTomy Convoy comes in the package in Robot mode.

Henkei Convoy unpacked.

Henkei Convoy is undeniable, feel heavy for its class. With details and accessories to complement the defacto Cybertronian Commander.

Henkei convoy instructions.

The only down side of Convoy, it is not a perfect transformation figure. It smoke stacks is transformed into its primary blaster and its truck roof is transformed to his secondary blaster.

Henkei Convoy and accessories.

With multiple accessories, Convoy can have different weapons configurations.

Henkei Convoy robo backgun back view.

Henkei Convoy Back Gun Armed back view.

One of the configuration is attaching the primary blaster it is mid transformed mode and attach them to the secondary gun which is still in the truck roof mode.

Henkei Convoy Robo backpack gun front view.

Henkei Convoy Back Gun Armed front view.

Another configuration is Convoy with truck roof as a back pack with a primary blaster. Every conservative peacekeeping forces would use.

Henkei Convoy Robo primary blaster with backpack back view.

The most popular mode for the most Gung-Ho people, dual blaster configuration. Aggressive and reckless nevertheless.

Henkei Convoy Robo dual blasters back view.

Henkei Convoy Robo dual blasters front.

Convoy in truck mode is something truly to behold. Almost perfect in all expect. Except the robot parts is able to be view from the underside of the truck. and if you can forgive the designers to be lazy to make big side piece of the truck is visible as part of the Convoy Robot arms.

Henkei Convoy Truck front.

Henkei Convoy Truck back view.

It is a shame that the under part of the truck expose the robot legs.

Henkei Convoy Truck underside.

The roof of the truck can be taken off but it will expose Convoy’s robot head.

Convoy truck roof detached.

Not forgetting the fact, the roof of the truck as well as the smoke stacks can be transformed into Convoy’s blaster.

Convoy Truck Roof detached.

Convoy Truck Roof Secondary Blaster.

Convoy Truck roof secondary blaster front view.

If you noticed the weapons details, TakaraTomy did not reserved and gives it more details. The smoke stacks can be detached and transformed into a small blaster with double barrel. Its design is very similar to the Warhammer 40K space marines bolters. Or atleast it has the outline of the Warhammer 40K bolters.

Convoy Primary Blaster - smoke stacks.

Convoy Primary Blaster - mid transformation.

Convoy Primary Blaster - Transformation Complete.

Convoy Primary Blaster side.

With good accessories Henkei Convoy is the best Henkei figure in the Henkei and Transformers classics line.

One thing which seperates Henkei from its cousins Transformers classics is chromed parts. The truck bumper and grill is chrome. Unfortunately it the part end up in Convoy’s behind. It is literally Convoy has a shiny ass in Robot mode. Reminds of Bender‘s famous quote “Bite my shinny metal ass.”

Henkei Convoy Robo.

Henkei Convoy Robo back view.

Another small details which I prefer is the fist of Convoy, for it is moulded or painted with 2 different color on a single fist.

Henkei Convoy Robo fist details.

Even Convoy’s robot head has a lot of details on it. The blue glow on the robot eyes is attributed to blue translucent plastics were used to allow light to pass through. Giving it a blue glow at the eyes or optics if you prefer

Henkei Convoy Head front view.

Henkei Convoy Head side view.

Henkei Convoy Head back.

Just manage to make lame pose with Convoy, but in reality it is a good possable figure and the joints is neither tight or loose; just nice.

Henkei Convoy simple pose.

Too bad there is no articulation at the waist. Else it can make more dynamic poses.

In a nutshell, C01 Henkei Convoy is an incredible toy transformable accessories. Good articulations. Good details just dumb down slightly by the fact it is not perfect transformation.

Highly recommended to Transformers fans old and new alike. Mecha lovers go get it.

There is also a 3rd party producer; FansProject has created extension to make this toy more worth while. Check out for the DIA Commander and the G3 Trailer.

Until the next post. Thank you for reading and visiting my website.

Henkei Convoy Robot mode.

The very old posts are :
1. Dancouga

2. Small but highly detailed Convoy a.k.a. Optimus Prime

3. Various chogokin comparison featuring comparison of Dancouga, Voltes V and GunBuster.

4. Love it and hate it Alpha figher toynami master piece ; MasterPiece Collection : VFA-6Z .

5. Review of THS-01 Galaxy Convoy :
Part 1
Part 2
Part 3

6. Review of THS-02 G1 Convoy :
Part 1
Part 2
Part 3
Part 4

Will work on newer updates in the future. Just realize this is the 2nd no pictures post in RobotHentai.com

Readjusting Diorama

Had little time to take some of a few exhibits using software panaroma.

Panaromic view 1

Panaromic View 2

Panaromic View 3

At the very last minute of the Transformers Convention, the TransMY crew before bracing for the flux of curious visitors for the Transformers Convention.

Double checking the list of transformers.

Making a last video recording before the Convention goes into full swing.

Transformers convention is never sweeter when curious and eagered visitors feeds their eyes with transformers eye candies.

Visitors phase 1

Another group of visitors of Transformers Convention.

A young visitor being indoctrinated into a Transformers fan.

A visitor scurry away to 1st floor for more transformers eye candies

To answer questions of inquisitive visitors, our crew is ever ready to give an enthusiastic explanation.

Our crew member enthusiastic shares his passion of Transformers G1.

There are various toy lines of Transformers is being displayed at the Transformers Convention.

BinalTechs realistic diecast car model Transformers.

G1 reissues that started the Transformers craze.

G1 SixShot

Metroplex, first Autobot transformable fortress.

The ever adorable MiniBots

Thanks to advanced manufacturing and material innovation, newer Transformers toys other than transformable, it also becomes durable. Example of those articulated and transformable Transformers toy line is Transformers Energon series.

Transformers Energon series.

With advent of better manufacturing and design technology, Transfomers toy makers and Hasbro has answer to it Fans dream to a perfect transformation, highly detailed every collectors must have collectible toy, The MasterPiece series. And Yes, Transformers Convention at Queensbay Mall has those toy lines displayed on this special occasion.

Masterpiece Ultra Magnus and Grimlock.

Masterpiece Starscream and its seekers.

To spice things up, Queensbay Mall has orgnize many more activity such as transformation competition and a look alike Mikaela contest.

Competition to transform Bumblebee.

The competition winner is...

On the Transfomers Convention second day there will be more activity and more fun. Hope to see you there participating in this first ever Transformers Convention hold in Penang at Queensbay Mall.

Masterpiece Prime and THS Prime showcase.

We have members from all around Malaysia contributing to make the event successful. Some of our members has created a Pyramid desert diorama on the face off between good and evil.

Original pyramid diorama without figures.

The details of the pyramid is improved by using actual sand and some detailing by adding desert vegetation.

Close up shot of structures surrounding pyramid.

Of cos a diorama is not complete without filling it with heroes and villian and everything in between.

Pyramid environment overview.

TransMY are trying to capture the essense of the climatic battle of Autobots and Decepticons in the Revenge of the Fallen, 2009 Transformers Movie.

Desert climatical battle diorama of ROTF.

Other than the diorama, TransMY have setup other attraction on different Transformers toylines.

Prime and Megatron FaceOff.

One of the common line is the Transformers Classics as well as the Transformers Henkei.

Transformers Henkei and Classic line up.

Another line up of Henkei and Classics.

ROTF Leader Class Prime show chase.

There are many many more, which is best you go to Queensbay Mall and meet with the TransMY Crew there. Do take your friends and family along.

Galvatron Robot mode aiming cannon.

After a series of complex transformation from tank mode to robot mode. Galvatron is almost the same rendition of its G1 Transformers movie.

Galvatron Robot mode front.

Compared to others Henkei or Transformers Classics or Transformers Universe toy. Galvatron Transformation is complex and frustrating. Wrong application of force will causes parts to be pop out. Which is true to the left arm shoulder sockets.

Galvatron robot mode close up.

The cannon at the left arm, is dominant, it takes about 30% of the entire Robot mode. The entire turret is folded and transformed into Galvatron´s right arm. Unfortunately, the hand is molded as a static opened arm with sharp claw like fingers.

Galvatron robot mode, overall close up focus.

In robot mode, the right arm is restricted to rotation at the shoulder axis and abit of articulation at the elbow. Nevertheless, the big gun is a cool factor. The gripe is Galvatron´s hips feels very feminine. It´s waist is able to be twisted.

Galvatorn robot mode neutral post.

The entire leg is made up from the tank threads. Alot of twist and turns and folding are required. Another half of the tank threads is transformed into Galvatron back or back pack. Unfortunately, there is no pegs to lock them into more stable position.

Galvatron robot back pack.

Past of the tank top is transform into Galvatron lower back slightly above the pelvic region; giving an impression of a skirt armor. Perhaps to prevent its foe shooting lasers at its butt. The skirt armor part is floppy.

Galvatron robot back isometric view.

Without the pseudo jet pack, Galvatron upper body would seems scrawny and thin. The jet pack beef up Galvatron appearance.

Galvatron robot side view.

The left arm is thin not proportioned to the right beefy cannon arm. Perhaps Galvatron fitness instructor specialized on building the right arm.

Galvatron robot mode left side view.

The length of the cannon on the right arm is 90-95 percent of the Galvatron robot height.

Galvatron very large side arm.

In term of detailing and face sculpt, it is a good as it gets compared to all existing official toy line from TakaraTomy or Hasbro.

Galvatron head close up.

The eyes is made of translucent amber colored plastics. Light is allows to pass thru from the back to the front to give an amber glow at the eyes.

Galvatron head detailing at the back.

The head is only able to turn left to right, it is not able to look up or down. Articulation of Galvatron figure is very limited to make things worse the joints are quite loose and floppy. The figure itself in robot mode is floppy and feels flimsy. It is less durable compared to its other Henkei toyline counterparts.

Galvatron getting ready to fire.

Due to the top part is heavier to the back and floppy hips, it has tendency to fall back.

Galvatron duking it.

Overall, the Henkei Galvatron toy in its robot mode has a lot of flaws. Gaps, floppiness, disproportioned, thin, scrawny, amber instead of red eyes.

The only reason that it is a taker is this-is-Galvatron factor. Only made for die hard fans. For casual playing it is not recommended at all.

The ultimate prey of the hunt, an alpha male of the group in red, blue and grey. A priced and ultimate prey for all the hunters, nick named Big Bot.

Upon reaching the destination, parked the car in a cost effective area (saving of RM3). Braved through a series of maze and labyrinth cargo lift and quiet hallways to reach Toys R US minutes before the launch. There is already 5 brave souls arrived waiting. And yes they are hunting the ultimate prey.

There is a catch, only one person are allow 1 Big Bot and you can only be able to purchase is you are a member of Toys R Us star card member.

A girl friend guarding her mate´s stuffs.

I did not realize how frantic the shoppers are until I have got out of the premise. Realized that some bring their wife/GF to watch over their purchase while they continue to buy more.

Some random kid dancing around

There are some kids running and playing outside the premise. I see more adults than kids

Shoppers continue to shop

Didn´t manage to talk to my friends, most of them went home after they got what they want. There are multiple shoppers that literally bag the Transformers toys and merchandise. Just went home after the random photo shooting. Exit using the main door for Gurney Plaza is officially open.

Optimus Prime Leader Class ROTF

A good buy I would say. Sorry to disappoint Takara Tomy supporters but I unable to tell the differences of Hasbro and Takara Tomy leader class Optimus Prime toy. And I would not pay more for a mere sticker. On top of that the toys are all made in China.

Extra gifts from Toys R Us with purchase of ROTF toys

The semi-exclusive gift: A poster of Optimus prime, a car sticker of optimus prime, a car sticker of Autobot Insignia, a new Hasbro catalog, a RM25 voucher valid from 8th June till 28th June 2009 and a bottle of orange juice. From my point of view it looks more like promotional and marketting materials hehe. Voucher to encourage spending and orange juice as a modest thank you

Well this is how a fine Saturday morning spent.

Starscream front view

Proportion wise it is ok, torso is good propotioned, but it has large legs and small hands short hands with 2 oversized cannons.

The pelvic area is only good when look from the front. From the view of the side, you will realized that the pelvic region is just a thin piece of plastic.

Starscream side view

From a closer view up at the sides, the transformation from F16 to robot left a big open gap that gives a representation of a hollow torso.

Starscream side view

Head detailing is commendable, the scuplt of the robot face is closely resembles the G1 Starscream Transfomers

Starscream face details

Back of the robot is less desirable, the nosecone of the F16 can be spotted connected to the back of Starscream head. Fortunately, the wings of the seeker is G1 animation accurate.

Starscream back view

Gimmick wise of this figure is very limited, it only has a pair of cannon which is able to shot out projectiles. Unfortunately, there is no spares, if the projectile is missing, the Starscream will look like battle damaged. Too bad, the do not make actual projectile but the barrel of the null cannon itself is the projectile.

Starscreamś null cannon

Articulation wise, its torso area has no articulation. Articulation is limited to head, arms hips and legs.

Starscream pose hindered by cannons

Arms articulation is very limited by the null cannons at the arms. Removing the cannons can improve the articulation of the arms.

Starscream arms articulation improved

Starscream is able to made to stand on 1 leg, unfortunately the loose hip joint causes the pose to show very funny result.

Starscream pose standing with 1 leg

Articulation of the head is limited to twisting the head from left to right and right to left. The limitation is due to the toy design in which the nosecone is attached to the head of Starscream.

Starscream head turned

Overall Starscream is an OK toy. The reason to get it is the Starscream factor. Sculpt is properly details but paint job is bad, lots of smudges. Articulation is hindered by the toy design. Very obvious hinderance to articulation is its null cannon, nosecone as well as very loose joints. Not to be repetative, the only redemption for the toy is because it is Starscream.

Starscream pose with null cannons